Page 6 of 9
Starting the front standard
Posted: 24 Oct 2013, 15:52
by Lachlan717
- photo-73.JPG (98.32 KiB) Viewed 10965 times
6mm Aluminium is a bastard. Enough said.
Starting the front standard II
Posted: 24 Oct 2013, 15:54
by Lachlan717
Still a bastard.
Re: Building an 8x10.
Posted: 14 Nov 2013, 18:43
by Lachlan717
Bugger it.
The aluminium cracked during bending.
New option needed...
Re: Building an 8x10.
Posted: 15 Nov 2013, 15:52
by smbooth
Ive got a piece of 6mm x 50mm bent at 90deg which didn't do that. Can you use it?
Re: Building an 8x10.
Posted: 15 Nov 2013, 21:39
by Lachlan717
smbooth wrote:Ive got a piece of 6mm x 50mm bent at 90deg which didn't do that. Can you use it?
Thanks, Shane.
I'm trying to find a piece of 80x80x6mm angle Al at the moment. If I can't find that, I'll be in touch!
Re: Building an 8x10.
Posted: 24 Feb 2014, 18:15
by Lachlan717
Update. Sneak peak.
Only got the Back and bellows to do. Sheet of CF ordered for the back. Might buy bellows. CBF teaching myself how to make them.
Re: Building an 8x10.
Posted: 28 Feb 2014, 07:49
by smbooth
Just when we were laughing and sniggering behind your back you go and post this.
Looking really good, my camera building lately has been limited to a piece of 8x10 matt board to make a blind in the back of the 810 so I can use the 4x10 film i have.
Re: Building an 8x10.
Posted: 02 Apr 2014, 18:09
by Lachlan717
The work on the back's commenced...
Re: Building an 8x10.
Posted: 05 Apr 2014, 08:02
by Andrew Nichols
wow looken good!
Re: Building an 8x10.
Posted: 05 Apr 2014, 08:28
by Lachlan717
Andrew Nichols wrote:wow looken good!
Thanks, mate.
Should be able to put a few hours in to it today.
Cutting carbon fibre is still no fun, though...