Darkrooms

smbooth
Posts: 405
Joined: 29 Jul 2012, 00:20

Darkrooms

Postby smbooth » 30 Jul 2012, 17:28

Lets see some Australia darkrooms. Mine is in being built mode, just undercoated the sink today ready for a 2 part epoxy during the week. Have acquired a area of 2m x 4 m as a part of my new home office which I'm going to use as a darkroom.

Cheers
Shane
Attachments
SMB_8059.JPG
SMB_8059.JPG (75.69 KiB) Viewed 6934 times
Sink1.jpg
Sink1.jpg (137.57 KiB) Viewed 6934 times

alexn
Posts: 95
Joined: 26 Jul 2012, 13:58
Location: Brisbane.
Contact:

Re: Darkrooms

Postby alexn » 31 Jul 2012, 12:21

Nice..

I am not fortunate enough to have a dark room... I have a cupboard under the stairs that has enough room for me to load and unload film holders, load developing tanks etc. but it has 0 facilities. Just a seat for me to sit down and a bench to put all the required stuff... Its better than using a loading tent I guess. I dont get get super sweaty hands just from loading 4 rolls of 120 film onto reels for developing, or loading 5 double darks...
http://www.facebook.com/alexartphotography - Alex art photography on Facebook
http://www.alexartphotography.com - Alex Nicholas Fine Art Photography

User avatar
Alastair Moore
Site Admin
Posts: 668
Joined: 26 Jul 2012, 09:29
Location: Darwin, Australia
Contact:

Re: Darkrooms

Postby Alastair Moore » 31 Jul 2012, 15:25

I'll get some photos my darkroom up when I next re-construct it. It's a bit of a temporary/ad hoc affair in the bathroom! Would love a dedicated room but alas not in my current apartment.

John Austin
Posts: 24
Joined: 26 Jul 2012, 10:58
Location: Quinninup Western Australia
Contact:

Re: Darkrooms

Postby John Austin » 03 Aug 2012, 19:01

This is an old pic from 2006 - Since then the darkroom has been extended, the DeVere 54 replaced with a DV504, the Focomat Ic replaced with a MG headed Leitz V35 and a new section of dry bench for 42" roll paper cutting and a contact printing frame - The deep tanks of D76d opposite the DV5108E were made up in 1985 and have been replenished ever since, like me, it improves with age - The pic, Hmm, how does that work? - Oh well no pic! - Anyhow it is on my old website sales page, but not on my new one yet, a nice new pic for that when it goes up

John

smbooth
Posts: 405
Joined: 29 Jul 2012, 00:20

Re: Darkrooms

Postby smbooth » 04 Aug 2012, 09:51

All we need is the photo John.. :) Maybe a new one even.

To Post photo - After you hit the post reply button, down on bottom left below text box is a 'options' and 'upload attached' tab. Select upload attachment, then you can select your file from your computer.

smbooth
Posts: 405
Joined: 29 Jul 2012, 00:20

Re: Darkrooms

Postby smbooth » 13 Aug 2012, 09:15

Upgrade, things are slowly coming along. Benchtops are fitted as is 90% of the extraction. Did the sink drainage but messed up the splashback which will now need to be redone before taps go on. I forgot the Durst has a growth on the back preventing it pushing back against the wall so will also need to fit a bit of a bench extension under the base of the enlarger. I rewired the safelight and it getting hung near the power outlet on the ceiling.
Attachments
SMB_8077.jpg
SMB_8077.jpg (145 KiB) Viewed 6871 times

Walter Glover
Posts: 1270
Joined: 31 Jul 2012, 22:31
Location: Leichhardt, NSW

Re: Darkrooms

Postby Walter Glover » 13 Aug 2012, 09:22

All very impressive Shane,

BUT .... I'd be painting the sloping ceiling and part of the flat ceiling black to kill fogging. I also invariably have the wall behind the enlarger black also.
Walter Glover

"We see things not as they are. We see them as we are."
Emanuel Kant

User avatar
Alastair Moore
Site Admin
Posts: 668
Joined: 26 Jul 2012, 09:29
Location: Darwin, Australia
Contact:

Re: Darkrooms

Postby Alastair Moore » 13 Aug 2012, 18:58

My "darkroom" is a slightly more modest affair but it suffices!

IMG_0242.JPG
IMG_0242.JPG (101.4 KiB) Viewed 6862 times


IMG_0236.JPG
IMG_0236.JPG (116.02 KiB) Viewed 6862 times


It's big enough to fit my trays and, when I finally get round to buying some paper, 8x10 contact prints on my LPL enlarger. What I'd like is a separate room with temperature controlled water and room for a 4x5 enlarger. Perhaps next year! In the meantime..

smbooth
Posts: 405
Joined: 29 Jul 2012, 00:20

Re: Darkrooms

Postby smbooth » 13 Aug 2012, 21:35

At least you can make prints.

John Austin
Posts: 24
Joined: 26 Jul 2012, 10:58
Location: Quinninup Western Australia
Contact:

Re: Darkrooms

Postby John Austin » 22 Aug 2012, 15:46

This is my darkroom as it was years ago in 2006 - New pix coming when it is extended to take a couple more DeVere enlargers and a contact printing set-up on the dry side and a set of roll processing troughs on the wet side for prints up to 40 x 50 inches - A recent print sale is paying for the work

Image

Since this was tooked, with a 2.1cm Nikkor, the old DV54 is being replaced with a DV504 and the little Focomat with a V35 - The big bugger at the end is a DV5108 10x8" enlarger and opposite it is my 1985+ deep tank line


Return to “Things”

Who is online

Users browsing this forum: No registered users and 18 guests

cron