Page 1 of 1

January wet plates - Central Highlands & Midlands of Tasmania

Posted: 15 Jan 2017, 21:28
by alexgard
A few images I took last week in the Midlands and Central HIghlands of Tasmania.

Central Highlands looks promising and will explore the area a little more this week hopefully.


8x10 black glass amrotypes. Getting some use out of the 120mm lens at last. Really interesting perspective. Great for getting up close and personal with those trees... amazed me at how close I could actually get and still keep the tree in view.

Image

Image

Image

Re: January wet plates - Central Highlands & Midlands of Tasmania

Posted: 15 Jan 2017, 22:01
by Walter Glover
Splendid work Alex.

What is the 120mm you are using? An Angulon or a Super-Angulon? Perhaps something else all together?

Re: January wet plates - Central Highlands & Midlands of Tasmania

Posted: 15 Jan 2017, 22:04
by alexgard
Thanks Walter

it is a NikkorSW 120mm f/8

I had to order a recessed lensboard for the lens as getting any movements out of it is quite tricky. The rear standard is racked about as far forward as it can go.

Re: January wet plates - Central Highlands & Midlands of Tasmania

Posted: 16 Jan 2017, 02:31
by Walter Glover
A stunning lens that even affords a bit of movement. I had one in my 8x10 days. I also had a 72mm Super-Angulon XL that made the most incredible 4 x 10s.

You really are venturing into a wonderful place with your wet plate mission.

January wet plates - Central Highlands & Midlands of Tasmania

Posted: 16 Jan 2017, 06:08
by alexgard
Walter I can't imagine being able to get a lens much closer to the film plane on my camera unless the rear element is set back much further back than the front standard.
Image

Sent from my SM-G930F using Tapatalk

Re: January wet plates - Central Highlands & Midlands of Tasmania

Posted: 16 Jan 2017, 06:37
by Walter Glover
I hear you Alex,

But back when I was shooting 8x10 I was using a Toyo 810M and a Sinar F2, both of which I had bag bellows for. Without the restriction and rigidity of a compressed bellows the entire world changes.

That looks to be a nice light weight kit for roaming the great outdoors. How bulky is all the stuff for the wet plate operation?

Posted: 16 Jan 2017, 06:42
by alexgard
All my travelling wet plate chemicals/funnels/filters i fit in a plastic storage container that stays in my van. Silver tanks obviously a bit bulky. The camera and tripod is as mobile as i like. In saying that the wet process keeps my limited to an area where i can get to and from my darkroom (van) within a couple of minutes.

Sent from my SM-G930F using Tapatalk

Re: January wet plates - Central Highlands & Midlands of Tasmania

Posted: 19 Jan 2017, 15:11
by smbooth
Really like the composition of the second one. Must be fun shooting this way.